Advertisement
oPERAtING YoUR BREVIllE PRoFESSIoNAl 800 CollECtIoN
Before first use
Remove and safely discard any packaging
material or promotional labels attached to your
kettle. It is recommended that before first use
to fill the kettle to the maximum level with cold
tap water, bring to the boil by selecting the
BOIL 100° button, then discard the water. Your
kettle will only operate when positioned on the
power base. The kettle will automatically switch
off when the water has reached the selected
temperature.
operation of your kettle
1.
To fill the kettle, remove the kettle from the
power base and open the lid by pressing the
lid release button. Fill with the desired amount
of water. Always fill the kettle between the
minimum (500) and maximum (MAX 1800)
marks on the water window. Too little water
will result in the kettle switching off before
the water has boiled or reached the selected
temperature.
2.
Ensure the lid is closed and locked firmly
into place. Position the kettle securely onto
the power base. Insert the power plug into
a 230/240 power outlet and switch on.
The START/CANCEL and 100° BOIL button
surrounds will illuminate in white for one
minute. A beep will sound for two seconds.
The START/CANCEL button surround will
automatically switch off after one minute if not
selected.
13
Note: If the StARt/CANCeL button is
pressed (before selecting a temperature
button), the StARt /CANCeL button
surround will illuminate in red and the
100º button surround will flash in white
and the kettle will start heating.
3.
Select the desired water temperature by
pressing one of the five variable Celsius
temperature buttons (80°, 85°, 90°, 95°,
100°). The selected button and the START/
CANCEL button surround will illuminate in
white.
Note: the KeeP WARM function can be
selected before, during or on completion
of the water heating cycle (refer page 9).
4.
Press the START/CANCEL button and the
surround will illuminate in red, the selected
temperature button surround will flash in
white and the kettle will start heating. Do not
remove the kettle from the power base during
operation. Ensure the kettle has switched
off after the water has boiled or the selected
temperature has been reached before
removing the kettle from the power base. If
VARIABlE tEMPERAtURE KEttlE
®
the kettle is removed from the power base
during the Keep Warm function the kettle will
automatically switch off.
5.
When the kettle has heated the water to the
selected temperature, 3 beeps will sound, the
START/CANCEL button surround illumination
will switch off, and the selected temperature
button surround will illuminate for 1 minute
before switching off.
6.
If the Keep Warm function has been selected,
the Keep Warm button surround will remain
illuminated in red, the selected temperature
button surround will remain illuminated in
white, and the kettle will continue to cycle on
and off for 20 minutes.
7.
If further heating of the kettle is not required,
switch off at the power outlet, unplug the
power cord and empty the water from the
kettle. Replace the kettle onto the power base
and close the lid.
Hide quick links:
Advertisement
