Know Your Breville Ikon Cordfree Kettle; Operating Your Breville Ikon Cordfree Kettle - Breville Ikon SK550XL User Manual

Know your Breville Ikon Cordfree Kettle

Removable scale filter
Filters out scale deposits for cleaner
water and prolongs element life
Premium quality brushed
stainless steel
1.5 litre capacity
Fast boil 1500 watt concealed element
Multi directional cordfree base
with cord storage
Features the unique
Breville Assist Plug™.
Easier to insert, easier
to remove.
Registered design.
6

Operating your Breville Ikon Cordfree Kettle

Before first use
Remove any promotional material attached to
Easy lift off lid your kettle.
with viewing window
It is recommended that before the first use the kettle
is filled to the maximum level, boiled and water
discarded. Your kettle will only operate when
Soft grip handle
positioned on the power base with the On/Off switch
in the 'On' position. The kettle will automatically
Safety auto cut out and
switch off once the water has boiled.
boil dry protection
Operation of your cordfree kettle
1. To fill the kettle, remove it from the power base
2. Ensure that the lid is locked firmly into place.
3. Press the On/Off switch to the 'On' position.
Always fill the kettle between the minimum
(Min) and the maximum (Max) marks on the
exterior of the kettle. Too little water will result
in the kettle switching 'Off' before the water
has boiled. Filling above the maximum mark on
the exterior of the kettle may result in boiling
water splashing from the kettle.
Illuminated water gauge
and On/Off switch
and lift off the lid. Fill with the desired amount
of water. Always fill the kettle between the
minimum and maximum marks on the water
window. Too little water will result in the kettle
switching off before the water has boiled.
Place the kettle firmly onto the power base.
Plug the power cord into 110V power outlet'.
The power 'On' light will illuminate.
Note
THIS APPLIANCE IS DESIGNED FOR THE BOILING OF DRINKING QUALITY WATER ONLY. NEVER
USE IT TO HEAT OR BOIL ANY OTHER LIQUIDS OR FOODSTUFFS. THE LID SHOULD ALWAYS BE
FIRMLY IN PLACE AND LOCKED CLOSED BEFORE USE.
This kettle must only be used with the
powerbase supplied. Use caution when pouring
water from your kettle, as boiling water will
scald. Do not pour the water too quickly.
Note
The kettle will automatically switch 'Off' once the
water has boiled. Lift the kettle from the power base
and pour the water. Take care to hold the kettle level,
especially when filled to the maximum level. To re-
boil it may be necessary to wait for a few seconds to
allow the control to reset.
The kettle may be stored on its power base when not
in use. Remove the power cord from the power outlet.
Safety boil dry protection
The kettle is fitted with a safety device, which
protects against overheating should the appliance be
operated with insufficient water. If this occurs the
kettle will stop heating. Switch 'Off' at the power
point and allow kettle to cool before refilling. The
safety device will automatically reset when the kettle
has cooled down.
For additional safety your kettle is fitted with an
additional thermal cut out. In the event of
overheating, the kettle will automatically shut down
to prevent further damage. Should this occur, take
your kettle to an authorised Breville Service Center.
7