Cal Spas Cal Heat CU-100 Owner's Manual page 59

Table of Contents

Advertisement

Troubleshooting Guide
PROBLEM:
There is no power.
SOLUTION:
1). Make sure that both ends of the power cord are securely plugged in to their respective
power outlets.
2). Make sure that the circuit breaker has not been tripped.
PROBLEM:
House breaker/fuse is tripping.
SOLUTION:
1). Make sure that the amperage of the breaker is the same as the amperage for the sauna.
2). Make sure that the circuit is not overloaded by running any appliances on the same circuit.
PROBLEM:
There is no power to the sauna or the radio/CD player.
SOLUTION:
1). Make sure that the main power cord is plugged securely into the wall outlet.
2). Make sure that the house circuit breaker for that line is not tripped.
3). Lift open the power supply cover. Mkae sure the other end of the main power cord is
plugged into the male outlet on the power supply.
PROBLEM:
Light is not working properly.
SOLUTION:
1). Disconnect the main power cord from the sauna and change the light bulb.
2). Check if the light has been manually turned off by pressing the 'Lamp' button on the con-
trol keypad.
PROBLEM:
The CD player is on, but there is no sound coming from the speakers.
SOLUTION:
1). Remove the speakers and make sure the speaker cables are plugged securely into the
speaker jacks.
2). Remove the 4 mounting screws from the plastic console where the radio/CD head unit is
located. Pull the radio/CD out and ensure that all connections in the back are secured
firmly to the radio/CD head unit.
3). Refer to the instruction manual for the Radio/CD player and check to see that the volume
is not turned all the way to zero.
PROBLEM:
Sound only comes from one speaker.
SOLUTION:
1). Remove the speakers and make sure the speaker cables are plugged securely into the
speaker jacks.
2). Remove the 4 mounting screws from the plastic console where the radio/CD head unit is
located. Pull the radio/CD out and ensure that all connections in the back are secured
firmly to the radio/CD head unit.
3). Refer to the instruction manual for the Radio/CD player and check to see that the sound
balance is not turned all the way to one side.
PROBLEM:
CD is playing correctly, but the radio doesn't tune in stations clearly.
SOLUTION:
1). Make sure that the antenna is out as far as it will go and move it around until stations
come in clearly.
2). Remove the 4 mounting screws from the plastic console where the radio/CD head unit is
located. Pull the radio/CD out and ensure that all connections in the back are secured
firmly to the radio/CD head unit.
3). Make sure the antenna is securely plugged into the antenna jack on the radio.
PROBLEM:
Radio/CD player is not working properly
SOLUTION:
1). Make sure that the radio faceplate is seated securely.
2). Remove the 4 mounting screws from the plastic console where the radio/CD head unit is
located. Pull the radio/CD out and ensure that all connections in the back are secured
Sauna Owner's Manual
LTR20071007, Rev. A
Using the Stereo System
Page 55

Advertisement

Table of Contents
loading

Table of Contents