First Use And Installation - Hisense H299BME User Manual

9

First use and installation

Cleaning before use
Before using the appliance for the first
time, wash the interior and all internal
accessories with lukewarm water and
some neutral soap in order to remove the
typical smell of a brand new product, then
dry thoroughly.
Installation Positioning
Warning! Before installing, read the
instructions carefully for your safety
and the correct operation of the appliance.
Position the appliance away from sources
of heat such as stoves, radiators, direct
sunlight, etc.
Maximum performance and safety are
guaranteed by maintaining the correct
indoor temperature for the class of unit
concerned, as specified on the rating
plate.
This appliance performs well in
appliance may not work properly if it is left
for a longer period at a temperature above
or below the indicated range.
Important! It is necessary to have good
ventilation around the refrigerator to allow
for the dissipation of heat, high efficiency
and low power consumption.
reason, a sufficiently cleared
be available around the
advisable for there to be
the back of the refrigerator
least 100mm of space on its two
height
of over 1 00mm from its top and a
clear space in front to allow the doors to
open 145°.
. The
ST
For this
space should
refrigerator . It is
50-70 mm separating
to the wall at
sides, a
Hisense Refrigerator
100mm
W
≥100
D
145
Relevant information(Constant/mm)
W W1
550 462 552 1072
Climate class Ambient temperature
SN +10°C to +32°C
N +16°C to +32°C
ST +16°C to +38°C
T +16°C to +43°C
Appliances must not be exposed to rain.
Sufficient air must be allowed to circulate
in the lower rear section of the appliance,
as poor air circulation can affect perfor-
mance. Built-in appliances should be
positioned away from heat sources such
as heaters and direct sunlight.
≥100
D
1
W
1
D D1