Table of Contents
Advertisement
Available languages
Available languages
6.4.5 Function: "Measure continuous
distance (max)
"Symbol
•
Procedure:
•
or a
Press button A once and keep it pressed for a
short time: Switch on the equipment
•
Press button B four times: Select function
•
ect
Press button B for longer if necessary: Select
reference point
•
Press button A once: Switch on the laser
•
Press button A once: Continuous measure-
ment
→The highest measurement result so far is
displayed at the top in m
→The current measurement result is
dth
displayed at the bottom in real time
7. Cleaning, maintenance and
ordering of spare parts
³
Danger!
Always pull out the mains power plug before star-
ting any cleaning work.
7.1 Cleaning
•
Keep all safety devices, air vents and the
or a
motor housing free of dirt and dust as far as
possible. Wipe the equipment with a clean
cloth or blow it with compressed air at low
ect
pressure.
•
We recommend that you clean the device
immediately each time you have finished
-
using it.
•
Clean the equipment regularly with a moist
cloth and some soft soap. Do not use
cleaning agents or solvents; these could at-
tack the plastic parts of the equipment. Ensu-
re that no water can seep into the device. The
ingress of water into an electric tool increases
the risk of an electric shock.
7.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
Anl_TC_LD_25_SPK9.indb 19
Anl_TC_LD_25_SPK9.indb 19
GB
7.3 Ordering spare parts and accessories
Please provide the following information when
ordering spare parts:
•
" (Fig. 8 / 8b)
•
•
•
For our latest prices and information please go to
www.Einhell-Service.com
8. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
9. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.
- 19 -
Type of unit
Article number of the unit
ID number of the unit
Spare part number of the required spare part
Tip! For good results we
recommend high-quality ac-
cessories from
!
www.kwb.eu
welcome@kwb.eu
20.07.2022 09:51:51
20.07.2022 09:51:51
Advertisement
Chapters
Table of Contents
