Setup and Connections
Advanced Connections
Advanced connections enable you to connect multiple components.
This section describes the types of inputs available on the back of your
TV and suggests ways you can use them for optimum performance.
Back of the TV
The diagram below describes each of the back panel jacks.
VCR Control
Connect the GUIDE Plus+
system IR controller for
one-button recording
and channel tuning from
the GUIDE Plus+ system.
6
VCR
CONTROL
Once you have made your connections,
you will need to program the TV to tune
to the correct channel in order to see and
hear audio and video from the
component.
CABLE/
ANTENNA
Cable/Antenna
Takes the signal input from a cable,
cable box, or an off-air antenna. Can also
be used for basic component connections.