Table of Contents
Advertisement
Add Your Plug to Home
This is a HomeKit-enabled device. You can also add it to the Home app for easy control from your iPhone or iPad. Follow the steps below to add your
smart mini plug via the
Home
app.
Before you start:
1. Your iPhone or iPad should be connected to a stable 2.4 GHz Wi-Fi network.
2. To control this HomeKit-enabled accessory, the latest version of iOS or iPadOS is recommended.
3. HomeKit will be disabled after 10 minutes since the smart plug is powered on. You can power off your device and power it back on, then try again.
Add to Home
1. Open the Home app. Or if you have added the smart plug to Tapo, you can also tap
Add to Home
in the
Device Settings
page.
2. Scan the HomeKit QR code on the provided label. It will be added to Home automatically.
5
Advertisement
Table of Contents
