Advertisement
Quick Links
English
Getting Started
Quick Start Guide
1. Get the Tapo app from the App
Mini Smart Wi-Fi Plug
Store or Google Play.
2. Follow the instructions in the Tapo
Tapo
app to complete the setup.
App
© 2022 TP-Link
7106509839 REV1.1.1
Failed to Add to Home?
Press and hold the Power button for 10 seconds to factory
reset the plug, and restart your phone.
Refer to the FAQ for detailed instructions.
https://www.tp-link.com/support/faq/3390/
Español (Latinoamérica)
Primeros pasos
¿Error al agregar a Inicio?
1. Obtenga la aplicación Tapo en App
Mantenga presionado el botón de encendido durante 10 segundos
Store o Google Play.
para restablecer de fábrica el contacto y reinicie su teléfono.
2. Siga las instrucciones de la
Consulte las preguntas frecuentes para obtener
aplicación Tapo para completar la
instrucciones detalladas.
configuración.
https://www.tp-link.com/support/faq/3390/
Supported Load Types for US Version:
100-125V, 50/60Hz, 15A, General use/Resistive
100-125V, 50/60Hz, 1/6HP, (4.4FLA/26.4LRA), Motor load
100-125V, 50/60Hz, 8A, Incandescent
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference. (2) This device must accept
any interference received, including interference that may cause undesired operation.
Please keep this instruction manual.
This is a portable direct plug-in device. Plug the device into a suitable outlet. This device
is intended for indoor use only. Keep the device away from heat sources and enclosed
spaces with poor ventilation.
Purpose of control: this is operating control.
Operating control, Type 1.B action
Impulse voltage: 1500V Pollution degree 2
NEMA Type 1 Enclosure
For technical support, the user guide and other information, visit
?
https://www.tapo.com/support/.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for TP-Link Tapo HomeKit P125
Summary of Contents for TP-Link Tapo HomeKit P125
- Page 1 Operating control, Type 1.B action instrucciones detalladas. https://www.tp-link.com/support/faq/3390/ Impulse voltage: 1500V Pollution degree 2 NEMA Type 1 Enclosure configuración. https://www.tp-link.com/support/faq/3390/ For technical support, the user guide and other information, visit © 2022 TP-Link 7106509839 REV1.1.1 https://www.tapo.com/support/.
- Page 2 配件及其他 ดู ค ำถามที ่ พ บบ อ ยสำหรั บ คำแนะนำโดยละเอี ย ด 2. ทำตามคำแนะนำในแอปพลิ เ คชั น Tapo 清潔。 備考1. "超出0.1 wt %" 及 "超出0.01 wt %" 系指限用物質之百分 定。 https://www.tp-link.com/support/faq/3390/ • 注意防潮， 請勿將水或其他液體潑灑到本產品上。 比含量超出百分比含量基準值。 https://www.tp-link.com/support/faq/3390/ • 插槽與開口供通風使用， 以確保本產品的操作可靠並防止過熱， 請勿堵塞...
Need help?
Do you have a question about the Tapo HomeKit P125 and is the answer not in the manual?
Questions and answers
Tapo app cannot find and load the existing P125 plugs that are in HomeKit.
The Tapo app may not find and load the existing TP-Link Tapo HomeKit P125 plugs due to several reasons:
1. The plug or phone may be too far from the router, causing a weak Wi-Fi signal.
2. The phone might be connected to the 5 GHz Wi-Fi instead of the required 2.4 GHz.
3. The Home app cache may need to be cleared by toggling the phone’s Wi-Fi off and on.
4. The plug may need to be factory reset by holding the power button for at least 10 seconds.
5. The router’s 2.4 GHz Wi-Fi channel might need to be set to a fixed channel like 1, 6, or 11.
Ensuring these conditions are met can help the app detect and load the plugs properly.
This answer is automatically generated