Tv/Dvd + A/V Receiver Or Speakers - RCA Scenium D52W136D User Manual

Connections & Setup

TV/DVD + A/V Receiver or Speakers

These are two different ways your TV/DVD uses a component to hear audio.
1. Connect audio cables to either the FIXED or VARIABLE AUDIO L and R OUTPUT jacks and
to the Audio Inputs on the A/V receiver.
• FIXED provides fixed-level audio output from the TV/DVD. This audio output is
ideal for connecting to an A/V receiver that has its own volume control.
• VARIABLE provides variable-level audio output. Volume levels can be controlled by
the volume controls on the TV/DVD's front panel and remote control.
2. Use speaker wire to connect the TV/DVD to external speakers.
• The EXT/INT switch beside the jacks let you turn the TV/DVD's internal speakers
on or off. If you connect external speakers, slide the switch to EXT so the audio is
sent to the external speakers only. Choosing INT sends the audio to the TV/DVD's
speakers only.
Note: The external speaker rating is 8 ohms with 15 watts power handling capabilities.
12
-OR-
����������������
���� ����
�
�
� � � �
� �
�
��������
������
��
� � � � �
�
�
Graphics contained within this publication are for representation only.
������������
�� ���� �� ���
�� �� �� ��
��� ���
�
�
��������
������
� �
������
���������
����� ����
�����������������
���������������� ��������
AUDIO/VIDEO OUTPUT
�����
������� � � �
���� �����������
� � �
��������
����
�����
�����������
�������� ��������� � �
� � �
2
Connect to either FIXED
or
VARIABLE Output
����
���
1
Chapter 1