Tv + Dvd + Audio Receiver - RCA CR29TF420 User Manual

From Cable,
Cable Box,
or Antenna

TV + DVD + Audio Receiver

1. Connect your TV to your Audio Receiver
2. Connect your DVD player to your TV
3. Connect cable or antenna to your TV
Chapter 1
DVD PLAYER
3
TV (back panel)
AUDIO RECEIVER
Connect the left and right audio cables to your audio receiver and to the AUDIO OUT L (left –
white) and R (right – red) jacks on the back of your TV.
A. Connect the white and red audio cables to the AV1 L and R audio input jacks on the back of
the TV and to the audio output jacks on the DVD player.
B. Connect an S-Video cable (not supplied) to the S-VHS jack on the back of the TV and to the
S-Video output jack on the DVD player.
Note: If your DVD player does not have an S-Video jack, use a regular video cable to connect
the DVD player's video output to the TV's AV1 VIDEO jack.
Connect the coaxial cable from your cable outlet, cable box, or antenna to the ANTENNA Jack on
your TV.
Connections & Setup
OUT
S-VIDEO
VIDEO R
2B
INPUTS AV1 AV2
AUDIO
VIDEO
ANTENNA
L
75 OHMS
(MONO)
R
AUDIO IN
R L
CH3
CH4
L
OUT
2A
S-VHS
1
Go to page 10
9