Bryant A11264 Owner's Manual page 5

CONDENSING GAS FURNACE: OWNER'S MANUAL
Fig. 8 – Close Valve
3. Turn OFF electrical supply to the furnace (see
Fig. 9 – Turn Off Electrical Supply
4. Remove the main furnace door (see
Fig. 10 – Remove Main Furnace Door (Upflow Configuration)
5. Turn the control switch on the gas control to the OFF position and
wait five minutes (see Fig.
the floor. If you smell gas, STOP! Follow "B" on furnace label. If
you don't smell gas, go to next step.
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
Fig. 9).
Fig. 10).
11). Then smell for gas, including near
SINGLE-STAGE GAS CONTROL
A06188
Fig. 11 – Control Switch to OFF
6. After waiting five minutes, turn control switch on the gas control to
the ON position. Turn the control switch to ON (see
SINGLE-STAGE GAS CONTROL
A92185
Fig. 12 – Control Switch to ON
7. Replace main furnace door (see
A11260
Fig. 13 – Furnace Door Replaced (Upflow Configuration)
8. Turn ON the electrical supply to the furnace and wait one minute
(see Fig. 14).
5
TWO-STAGE GAS CONTROL
GAS CONTROL SWITCH
SHOWN IN "OFF" POSITION
MODULATING GAS CONTROL
GAS CONTROL SWITCH
SHOWN IN "OFF" POSITION
Fig.
TWO-STAGE GAS CONTROL
GAS CONTROL SWITCH
SHOWN IN "ON" POSITION
MODULATING GAS CONTROL
GAS CONTROL SWITCH
SHOWN IN "ON" POSITION
Fig. 13).
A11292
12).
A11291
A11261