Maintenance Checklist - Bryant A11264 Owner's Manual

Condensing gas furnace

Hide thumbs Also See for A11264:

Owner's manual (14 pages)

Table Of Contents

Table of Contents

CONDENSING GAS FURNACE: OWNER'S MANUAL

For your convenience, please record the model and serial numbers of your new equipment in the spaces

provided. This information, along with the installation data and dealer contact information will be helpful

should your system require maintenance or service.

FURNACE

Model # _____________________________________

Serial # ______________________________________

AIR CONDITIONER OR HEAT PUMP

Model # _____________________________________

Serial # _____________________________________

INDOOR COIL (Furnace Coil or Fan Coil)

Model # _____________________________________

Serial # _____________________________________

In addition to the type of routine maintenance you might be willing to perform; your furnace should be inspected regularly by a properly trained

service technician.

You should work with your dealer or service technician to assure your inspection includes the following at a minimum.

This list may not include all maintenance items, and inspection interval times may vary depending on operational conditions of the furnace.

Furnace specific, external items:

Clean or replace air filters.

Inspect cabinet for signs of damage.

Inspect electrical disconnect for proper function. Repair or replace as necessary.

Inspect external wiring for damage.

Inspect gas supply line and manual shut-off for leaks.

Furnace specific, internal items:

Inspect and clean blower assembly (includes blower housing, blower wheel and motor).

Inspect gas valve and check for proper manifold gas pressure Adjust as needed.

Inspect ignition system and safety controls. Clean and adjust as needed.

Inspect control box, associated controls, wiring and connections.

Check combustion blower housing for lint and debris and clean as necessary.

Inspect burner assembly - clean as needed.

Inspect RPJ? heat exchanger - clean as needed.

Inspect flue system—check for proper attachment to the furnace, any dislocated sections, and for

signs of corrosion. Replace if necessary.

System:

Inspect airflow system (ductwork)—check for leaks and repair as needed.

Inspect evaporator coil, drain pan and condensate drain lines as applicable. Clean as needed.

Ask your servicing dealer for further details about an economical service contract that covers seasonal inspections.

A Carrier Company

Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.

NOTE TO EQUIPMENT OWNER:

NOTE TO INSTALLER:

This manual must be left with the equipment owner.