Philips S9711/23 Manual page 37

Problem
An exclamation
mark,
replacement
reminder and
the cleaning
reminder
have suddenly
appeared on the
display.
Water is leaking
from the
bottom of the
shaver.
The SmartClean
system does not
work when I
press the on/off
button.
The shaver is
not entirely
clean after I
clean it in the
SmartClean
system.
Possible cause
The shaving heads
are soiled or
damaged.
During cleaning,
water may collect
between the inner
body and the outer
shell of the shaver.
The SmartClean
system is not
connected to the
mains.
You have not placed
the shaver
in the SmartClean
system properly,
so there is no
electrical connection
between the
SmartClean system
and the shaver.
The cleaning
cartridge needs
replacement.
ENGLISH
Solution
Replace (see chapter
'Replacement') or clean the
shaving heads (see chapter
'Cleaning and maintenance').
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the shaver.
Put the small plug in
SmartClean system and
put the adapter in the wall
socket.
Press down the top cap
('click') to ensure a proper
connection between the
shaver and the SmartClean
system.
Replace the cleaning
cartridge (see chapter
'Cleaning and maintenance').
37