Intrusion Switch; Removing The Intrusion Switch; Installing The Intrusion Switch - Dell OptiPlex 3080 Small Form Factor Service Manual

Intrusion switch

Removing the intrusion switch

Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the Side cover
About this task
The following images indicate the location of the intrusion switch and provide a visual representation of the removal procedure.
Steps
1. Disconnect the intrusion switch cable from the connector on the system board.
2. Slide the intrusion switch and lift it away from the system .

Installing the intrusion switch

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the intrusion switch and provides a visual representation of the installation
procedure.
18 Field service information