Steps
1. Insert the coin cell battery with the "+" sign facing up and slide it under the securing tabs at the positive side of the
connector.
2. Press the battery into the connector until it locks into place.
Next steps
1. Install the front bezel.
2. Install the side cover.
3. Follow the procedure in after working inside your computer.
Expansion card
Removing the expansion card
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the Side cover
About this task
The following images indicate the location of the graphics card and provide a visual representation of the removal procedure.
Field service information
37
Need help?
Do you have a question about the OptiPlex 3080 Small Form Factor and is the answer not in the manual?
Questions and answers