Sony WH-XB900N Help Manual page 71

Help Guide
Wireless Noise Canceling Stereo Headset
WH-XB900N
Listening to music from a device via Bluetooth connection
If your Bluetooth device supports the following profiles, you can enjoy listening to music and perform basic remote
control operation of the Bluetooth device via a Bluetooth connection.
A2DP（Advanced Audio Distribution Profile）
You can enjoy high-quality music wirelessly.
AVRCP（Audio Video Remote Control Profile）
You can adjust the volume, etc.
The operation may vary depending on the Bluetooth device. Refer to the operating instructions supplied with the
Bluetooth device.
Connect the headset to a Bluetooth device.
1
Wear the headset.
2
Adjust the length of the headband.
Put the headset on your head with the
(left) unit has a tactile dot.
Be careful not to come in contact with the touch sensor control panel when you wear the headset.
A: Tactile dot
B: Touch sensor control panel
Operate the Bluetooth device to start playback and adjust the volume to a moderate level.
3
Control the volume by operating the touch sensor control panel.
4
To increase the volume: Swipe up repeatedly until the volume reaches the desired level.
(left) mark on your left ear and the
71
(right) mark on your right ear. The