Sony WH-XB900N Help Manual page 57

Help Guide
Wireless Noise Canceling Stereo Headset
WH-XB900N
Connecting to a paired computer (Mac)
Compatible OS
macOS (version 10.10 or later)
Before starting the operation, make sure of the following:
Depending on the computer you are using, the built-in Bluetooth adaptor may need to be turned on. If you do not
know how to turn on the Bluetooth adaptor or are unsure if your computer has a built-in Bluetooth adaptor, refer to
the operating instructions supplied with the computer.
Set the computer speaker to the ON mode.
If the computer speaker is set to the
Computer speaker in the ON mode
Wake the computer up from sleep mode.
1
Turn on the headset.
2
Press and hold the
Check that the indicator (blue) continues to flash after you release your finger from the button. You will hear the
voice guidance "Power on".
After the headset turns on, if it has automatically connected to the last connected device, you will hear a voice
guidance "Bluetooth connected".
Check the connection status on the computer, and if it is not established, proceed to step 3.
Select the headset using the computer.
3
1. Select [ (System Preferences)] - [Bluetooth] from the task bar in the lower right part of the screen.
"OFF" mode, no sound is heard from the headset.
button for about 2 seconds.
57