Table of Contents
Advertisement
Quick Links
Advanced Airport Lighting System
EUL Series of Elevated Uni-directional Lighting Fixtures
EUL-AP Approach Light, EUL-AP Side-row Light, EUL-TH Runway
Threshold Light, EUL-TH Threshold Wing Bar Light, EUL-ED End Light
and EUL-SB Elevated Stop Bar Light
Operation Manual
Please read this manual carefully before construction, installation and operation of the product.
Please keep this manual properly for further reference.
This manual is subject to change without prior notice.
Airsafe Airport Equipment Co., Ltd.
1
Advertisement
Table of Contents
Related Manuals for Airsafe EUL Series
Summary of Contents for Airsafe EUL Series
- Page 1 Advanced Airport Lighting System EUL Series of Elevated Uni-directional Lighting Fixtures EUL-AP Approach Light, EUL-AP Side-row Light, EUL-TH Runway Threshold Light, EUL-TH Threshold Wing Bar Light, EUL-ED End Light and EUL-SB Elevated Stop Bar Light Operation Manual Please read this manual carefully before construction, installation and operation of the product.
- Page 2 Advanced Airport Lighting System Revision Description Version Revised Approved Description Date First release V1.0 Y.YH C.SY Feb. 15, 2008 Type and composing adjustment V1.1 X.CL Nov. 11, added 2016...
-
Page 3: Table Of Contents
Advanced Airport Lighting System Table of Content Table of Content ................................ 3 1.0 Foreword ................................4 1.1 Illustrations and Meanings ........................... 5 1.2 Safety Rules and Notices ..........................6 1.3 Quality Assurance and Responsibility ......................7 2.0 Introduction ................................. 8 2.1 Technical Specifications........................... -
Page 4: Foreword
Advanced Airport Lighting System 1.0 Foreword ICAO Airport Service Manual Part 9 “Airport Maintenance Practices” and FAA AC150/5345-26 Maintenance of Airport Visual Aid Facilities are the highest criterions for site installation and maintenance of such lighting fixtures. This manual was compiled with considerable reference to these two criterions. -
Page 5: Illustrations And Meanings
Advanced Airport Lighting System 1.1 Illustrations and Meanings ○ Following illustrations will appear in this manual where necessary to remind or warn construction or maintenance personnel. ○ Please continue reading the subsequent content of this manual after properly understanding the meanings of these illustrations. ... -
Page 6: Safety Rules And Notices
Advanced Airport Lighting System 1.2 Safety Rules and Notices Using the light fixtures outside of airport is strictly prohibited. ※ Inadequate maintenance or casual touch will cause light faults. Using power supply other than CCR is strictly prohibited. ※... -
Page 7: Quality Assurance And Responsibility
Advanced Airport Lighting System 1.3 Quality Assurance and Responsibility Any defect in design, material or workmanship, which may occur during proper and normal use over a period of one year from date of installation but less than 15 months from date of shipment, or within the warranty period of the tender, will be repaired or preplaced by manufacturer free of charge. -
Page 8: Introduction
Advanced Airport Lighting System 2.0 Introduction This manual involves the following series lighting fixtures: EUL-AP-------------------------------------------Elevated Approach Centerline Light EUL-SR-------------------------------------------Elevated Approach Side-row Light EUL-TH-------------------------------------------Elevated Runway Threshold Light EUL-THW----------------------------------------Elevated Runway Threshold Wing Bar Light EUL-ED-------------------------------------------Elevated Runway End Light EUL-SB-------------------------------------------Elevated Stop Bar Light Type of Elevated Approach Centerline Light (EUL-AP): Type EUL-AP= Elevated approach centerline light... - Page 9 Advanced Airport Lighting System Type of Elevated Runway Threshold Light (EUL-TH): Type EUL-TH= Elevated runway threshold light Power Beam color G = Green Type of Elevated Runway Threshold Wing Bar Light (EUL-THW): Type EUL-THW= Elevated runway threshold wing bar light Power Beam color G = Green...
-
Page 10: Technical Specifications
Advanced Airport Lighting System 2.1 Technical Specifications This product conforms to the provisions of the following standards or technical specifications. For dated standards or technical specifications, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. -
Page 11: Application Environment
Advanced Airport Lighting System 2.2 Application Environment Altitude: below 4,000m; Outdoor: -55°C ~ +55°C; Relative air humidity: not more than 95%; In rain, snow, ice and water; Expose to corrosive salt atmosphere. Basic earthquake intensity VII. 2.3 Application Scope Elevated approach centerline light, elevated approach side-row light, elevated runway threshold light, elevated runway threshold wing bar light, elevated runway end light and elevated stop bar... -
Page 12: Technical Features
Advanced Airport Lighting System 2.5 Technical Features Proprietary optical design and the lighting fixtures still have full-optical output when part of the front glass is sheltered; The filter employs advanced coating technology, with high light transmittance, firm coating and good thermostability;... -
Page 13: Structure
Advanced Airport Lighting System 2.6 Structure 1 Cover bracket 2 Optical cover 3 Filter 4 LED lamp assy 5 Reflector 6 Light body 7 Lamp holder 8 Lamp 9 Body gasket 10 Rear Cover 11 Hinge pin of rear cover 12 Front adjusting screw 13 Check ring 14 Hinge pin of light body... -
Page 14: Installation
Advanced Airport Lighting System 3.0 Installation Requirements for installation should be learned thoroughly before installation including installation tools and site requirement, etc., to avoid malfunction of the light due to incorrect installation. 3.1 Installation Tools Choosing right tools not only can ensure the correct and reliable installation of the lighting fixtures, but also can reduce unnecessary safety accidents. -
Page 15: Flange And Frangible Pole
Advanced Airport Lighting System 3.3 Flange and Frangible Pole ○ This Operation Manual does not define the installation of the flange. For the technical support, please contact the construction party and the dimension of the chassis installed, please see Figure below: ○... -
Page 16: Installation Methods
Advanced Airport Lighting System 3.4 Installation Methods Method 1: Mast installation; Method 2: Installation of extension pole; Method 3: 12 inches deep bucket installation; Method 4: Direct installation of flange; Method 1 Method 2 Method 3 Method 4 When unpacking, please note whether the carton is intact. ※... -
Page 17: Installation Steps
Advanced Airport Lighting System 3.5 Installation Steps Installation method 1: Mast installation Connect the A6 plug of the lighting fixtures with the secondary receptacle of the isolation transformer and cover the lighting fixture onto the support reserved by the mast. ... -
Page 18: Adjustment Of Horizontal And Vertical Beam Angles Of Lighting Fixtures
Advanced Airport Lighting System 3.6 Adjustment of Horizontal and Vertical Beam Angles of Lighting Fixtures Before formal use, the horizontal beam angle of the light head must be adjusted. Except that the horizontal angle shall be strictly parallel to the runway centerline, the vertical angle shall strictly comply with the design installation angle. -
Page 19: Corrector Installation
Advanced Airport Lighting System 3.6.3 Corrector installation As shown in Figure, open the rear cover of the light body assy, three cylindrical bosses of the calibrator are aligned with those of the light body and screw the set screws (4) to complete the connection between the calibrator and light body assy. -
Page 20: Adjustment Of Vertical Beam Angle
Advanced Airport Lighting System 3.6.5 Adjustment of vertical beam angle: Prior to calibration, the level angle of the inclinometer shall be calibrated to 0º on the level slab. Put the digital inclinometer on the calibration bracket, slightly unscrew the front, rear and side adjusting screws of the lighting fixtures, through adjusting the front and rear adjusting screws, make the lighting fixtures rotate along with the hinged shaft of the light body, observe the value on the digital inclinometer to make it reach the design angle and lock the front, rear and side... -
Page 21: Replacement Of Components Of Lighting Fixtures
Advanced Airport Lighting System 4.0 Replacement of Components of Lighting Fixtures When any damage or failure occurs to any consumable or other component of the lighting fixtures, it is required to timely dismantle the lighting fixtures for replacement of the component. Replacement of components needs to dismount the lighting fixtures, so any minor error will cause adverse consequences. -
Page 22: Replace Lamp
Advanced Airport Lighting System 4.1 Replace Lamp Take out the lamp: Open the rear cover on the light body assy and pull down the lamp pin. Hold the lamp tail with the thumb and index finger, move the semicircle groove at the lower part of the lamp base backwards out of the lamp holder by gently raising it upwards to take out the lamp. -
Page 23: Operation And Control
Advanced Airport Lighting System 5.0 Operation and Control The lighting fixtures are applicable to CCR power supply 6.6A circuit special for airports, which forms a secondary circuit with the lighting fixtures through secondary lead of isolation transformer connected on primary circuit. Due to the use of isolation transformer, the damage of lamp of single lighting fixture will not affect whole series circuit. -
Page 24: Maintenance Of Lighting Fixtures
Advanced Airport Lighting System 6.0 Maintenance of Lighting Fixtures Suggestions for daily maintenance provided in this section are only for reference. Airports may formulate their own daily maintenance guidelines with reference to other provisions or maintenance experience of airport staff; the manufacturer does not provide any hard-and-fast rules. -
Page 25: Regular Spot Check And Troubleshooting
Advanced Airport Lighting System The manufacturer suggests that times of daily maintenance should be increased in rainy season. ※ To ensure normal operation of lighting fixtures. Live line maintenance of the lighting fixtures is strictly prohibited; in case of lightning and/or thunderstorm, maintenance of the lighting fixtures is prohibited. -
Page 26: List Of Components And Ordering Of Spare Parts And Accessories
Advanced Airport Lighting System 7.0 List of Components and Ordering of Spare Parts and Accessories The list of parts of this product and relevant ordering information of the spare parts and accessories are shown in the Table of this Chapter. The manufacturer accepts to order in a manner of component or separate ordering of the parts. - Page 27 Advanced Airport Lighting System List of supporting accessories of this product is as follows (needing additional order): Serial Order No. Description 276A1 Flange 240mm 27683 Flange 304mm (FAA standard) 924252 2 inches sleeve frangible assy 924241 2 inches frangible pole ITF-045-066 Isolation transformer 45W ITF-100-066...
-
Page 28: Packaging, Transportation And Storage
Advanced Airport Lighting System 8.0 Packaging, Transportation and Storage 8.1 Packaging and Weight Packaging: 1 pc / box (excluding flange) Gross weight: 2.33 KG / box Volume: 220*220*265 Flange (Ø240) 6 pcs / box Gross weight: 8.5 KG / box Volume: 250*250*185 8.2 Transportation Mode Well packed products may be transported in three modes- railway, highway and air according... - Page 29 Advanced Airport Lighting System The final right to interpret this manual is reserved by Airsafe Airport Equipment Co., Ltd. Thanks for your purchasing and using AIRSAFE product! Address: No. 38, Anxin Road, Xuhang Town, Jiading District, Shanghai, China Postal Code: 201800 Tel.: 021-53540453...
Need help?
Do you have a question about the EUL Series and is the answer not in the manual?
Questions and answers