Download
Share
Print this page
Abilica 555 200 Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Abilica Manuals
  4. Home Gym
  5. 555 200
  6. Assembly instructions manual
Abilica 555 200 Assembly Instructions Manual

Abilica 555 200 Assembly Instructions Manual

Infinity 2-station home gym
Hide thumbs

Advertisement

Quick Links

Download this manual
Assembly Instructions
Infinity 2-Station Home Gym
Art No. 555 200 &
OPTION:Dip Station (VKR)
Art No. 555 210
- -
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 555 200 and is the answer not in the manual?

Questions and answers

Related Manuals for Abilica 555 200

Summary of Contents for Abilica 555 200

  • Page 1 Assembly Instructions Infinity 2-Station Home Gym Art No. 555 200 & OPTION:Dip Station (VKR) Art No. 555 210...
  • Page 2 IMPORTANT SAFETY INFORMATION TO AVOID INJURY AND/OR AN ACCIDENT READ AND FOLLOW THESE SIMPLE SAFETY RULES: 1. Do not allow children to play on or around UNIT. 2. Securely tighten all nuts and bolts and regularly check to insure that all bolts and nuts have not loosened.

  • Page 3: Hardware Illustrations

    ITEM NUMBERS IN INSTRUCTIONS ARE SAME AS ITEM NUMBERS IN PARTS LIST. THE HARDWARE QUANTITIES SHOWN IN PARTS LIST, ARE QUANTITIES REQUIRED TO COMPLETE ASSEMBY OF THIS PRODUCT. IF YOU FIND YOU HAVE MORE HARDWARE THAN IS REQUIRED, DISCARD EXCESS HARDWARE. INCHES MILLIMETERS PLACE WASHER, END OF BOLT, OR SCREW...

  • Page 4: Parts List

    PARTS LIST Q’TY ITEM PART NO. PART NAME 02059100 38402316 Front Floor Tube 38402416 Dip Stand Base 38402616 Base 31308716 Flat Plate 22035300 M10 × 1.5 × 75 mm Long Hex Head Bolt 26016800 M10 Washer 25028300 M10 × 1.5 Locknut 30489716 Rear Floor Tube 2”...
  • Page 5 Q’TY ITEM PART NO. PART NAME 38403616 Front Seat Mount 29461000 Lift Tube “D” Bushing 39461000 22035400 M12 × 1.75 × 80mm Long Hex Head Bolt 26023300 M12 Washer 25028400 M12 Locknut 38403716 Front Seat Support 39442300 Front Seat 02053100 Round Plug 30447067 Sleeve Tube...
  • Page 6 IMPORTANT PLEASE READ ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING. FIGURE 1 Step 1. Push CAPS (1) over ends of FRONT FLOOR TUBE (2), DIP STAND BASE (3) and BASE (4). (It is option:Dip Stand Step) Step 2. Attach FRONT FLOOR TUBE (2), with BRACKET to front side, to LONG END of BASE (4), with BRACKETS facing up, using FLAT PLATE (5), BOLTS (6), WASHERS (7) and LOCKNUTS (8).
  • Page 7 FIGURE 2 Step 4. Push CAPS (1) over ends of REAR FLOOR TUBE (9). Step 5. Push 2” SQUARE PLUG (10) into REAR SUPPORT (12). Step 6. Push 1 1/2” SQUARE PLUGS (11) into REAR SUPPORT (12). Step 7. Attach REAR FLOOR TUBE (9) and REAR SUPPORT (12) to BASE (4) with BOLTS (6), WASHERS...
  • Page 8 FIGURE 3 Push 2” SQUARE PLUG (10) into TOP SUPPORT (15). Step 9. Step 10. Attach TOP SUPPORT (15), with BRACKETS facing down, to FRONT SUPPORT (14) using BOLTS (6), CHANNEL PLATE (16), WASHERS (7) and LOCKNUTS (8). Step 11. Attach TOP SUPPORT (15) to REAR SUPPORT (12), through TOP HOLES, with BOLTS (6), CHANNEL PLATE (16), WASHERS (7) and LOCKNUTS (8).
  • Page 9 FIGURE 4 Step 13. Attach REAR SEAT MOUNT (18), to one of three mounting positions, on REAR SUPPORT (12) with BOLTS (6), CHANNEL PLATE (16), WASHERS (7) and LOCKNUTS (8). Step 14. Thread SEAT PULL KNOB (19) into REAR SEAT MOUNT (18). Step 15.
  • Page 10 FIGURE 5 Step 16. Carefully slide WEIGHTS (22), one at a time with GROOVE on bottom and facing outside, down GUIDE RODS (21). NOTE: Remove CENTER BUSHING from TOP WEIGHT – see DETAIL “A” below. Step 17. Insert WEIGHT SELECTOR ROD (23) into CENTER HOLE of PLATE (24) and fasten, at TOP HOLE, with SOCKET SCREW (25).
  • Page 11 FIGURE 5...
  • Page 12 FIGURE 6 (Step 27-32 :It is option:Dip Stand Step) Step 27. Attach DIP STAND (34), with LONG END facing down, to DIP STAND SUPPORT (28) with BOLTS (6), CHANNEL PLATE (16), WASHERS (7) and LOCKNUTS (8). Step 28. Attach DIP STAND BACKREST (35) to DIP STAND (34) with BOLTS (60) and WASHERS (37). Step 29.
  • Page 13 FIGURE 7 Push 2” SQUARE PLUGS (10) into ends of REAR SEAT SUPPORT (41) as shown. Step 33. Step 34. Attach REAR SEAT (42) to REAR SEAT SUPPORT (41) with BOLTS (38) and WASHERS (37). Step 35. Pull SEAT PULL KNOB (19) and insert REAR SEAT SUPPORT (41), with SMALL END of REAR SEAT (42) facing REAR, into REAR SEAT MOUNT (18) and release SEAT PULL KNOB to lock REAR SEAT SUPPORT at desired height.
  • Page 14 FIGURE 8 Step 38. Thread a SEAT PULL KNOB (19) into GUIDE TUBE of FRONT SEAT MOUNT (45). Attach FRONT SEAT MOUNT (45) to FRONT SUPPORT (14), with 2” SQUARE PLUG (10) Step 39. facing up, using CHANNEL PLATE (16), BOLT (6), WASHERS (7) and LOCKNUTS (8). Push 2”...
  • Page 15 FIGURE 9 Push 2” SQUARE PLUGS (10) into FRONT SEAT SUPPORT (51). Step 42. Step 43. Attach FRONT SEAT (52) to FRONT SEAT SUPPORT (51), so that SMALL END will be facing FRONT, with BOLTS (38) and WASHERS (37), Step 44. Pull SEAT PULL KNOB (19) and insert FRONT SEAT SUPPORT (51), with SMALL END of FRONT SEAT (52) facing FRONT, into GUIDE TUBE of FRONT SEAT MOUNT (45) and release SEAT PULL KNOB for lock FRONT SEAT SUPPORT at desired height.
  • Page 16 FIGURE 10 Step 47. Push ROUND PLUGS (53) into each end of SLEEVE TUBES (54). Step 48. NOTE: Spray window cleaner applied to inside of SHORT SLEEVES (55) and outside of SLEEVE TUBES (54) will help SHORT SLEEVES slide on easier. Push one SHORT SLEEVE onto one end only of each SLEEVE TUBE until flush with end of SLEEVE TUBE.
  • Page 17 FIGURE 11 Step 51. Push Rectangle Plugs (56) into HANDLEBAR SUPPORT (57). Step 52. Push BRONZE BUSHINGS (58) into TOP SUPPORT (15) and HANDLEBAR SUPPORT (57). Step 53. Thread LOCKNUT (50) onto AXLE (59) until tight. Step 54. Insert AXLE (59) through BRONZE BUSHINGS (58) in HANDLEBAR SUPPORT (57) and TOP SUPPORT (15) and fasten with LOCKNUT (50).
  • Page 18 FIGURE 12 Step 56. Attach SWIVEL BRACKETS (61 RIGHT & 62 LEFT ), with TOP of SWIVEL BRACKET leaning to outside as shown in DETAIL “B” to each side of REAR SUPPORT (12) using BOLTS (63), WASHERS (49) and LOCKNUTS (50). Push 2”...
  • Page 20 FIGURE 13 Step 63. NOTE: See USAGE MANUAL (94) for specific exercises that require LIFT TUBE (46) to be locked. Insert LOCKOUT PIN (71) completely through both sides of BRACKET of FRONT SEAT MOUNT (45) to lock LIFT TUBE. NOTE: There are three CABLES – see DETAIL “E” below. The LOWER CABLE (72) has Step 64.
  • Page 21 FIGURE 13...
  • Page 22 FIGURE 14 Step 71. Insert SCREW end of UPPER CABLE (73) through GUIDE WIRE of TOP SUPPORT (15), over ROD of HANDLEBAR SUPPORT (57). through SLOT in FRONT SUPPORT (14) and thread into WEIGHT SELECTOR ROD (23). NOTE: About 3 or 4 turns into WEIGHT SELECTOR ROD should be enough to hold UPPER CABLE temporarily.
  • Page 23 FIGURE 14...

  • Page 24: Selector Rod

    FIGURE 15 Step 79. Assemble PULLEY (75), BUTTERFLY CABLE (74) and PULLEY COVERS and attach to PULLEY BRACKET (81) with BOLT (77), WASHERS (7) and LOCKNUT (8). Step 80 Assemble PULLEY (75), BUTTERFLY CABLE (74) and PULLEY COVERS and attach to SWIVEL BRACKETS (61 &...
  • Page 25 FIGURE 16. Step 84. Thread one BOLT (60) into one end of PIVOT TUBE (85), then slide one WASHER (86) onto PIVOT TUBE. Step 85. Insert PIVOT TUBE (85) through one side of HANDLEBAR (84), LARGE SPACER (87), HANDLEBAR SUPPORT (57), other LARGE SPACER and other side of HANDLEBAR and fasten with WASHER (86) and BOLT (60).
  • Page 26 FIGURE 17 Step 86. Push SMALL GRIPS (32) onto LAT BAR (89) and CURL BAR (90). The following items can be attached to EYE at BALL end of UPPER CABLE (73) with SINP-LINK (79): a. LAT BAR (89) (shown attached). b.
  • Page 27 Leverandør: Sport Supply Int. AS Postboks 226 3051 Mjøndalen E-post: post@sportsupply.no www.sportsupply.no www.abilica.no © Sport Supply Int. AS...

This manual is also suitable for:

555 210