Button Description - RCA RCU500 User Manual

Button Description

Device Buttons
(VCR1, VCR2•LD, DSS•CABLE, AUDIO, TV)
Determines which device you are controlling. The
VCR2•LD and DSS•CABLE buttons can be assigned to
one of the two devices listed. For example, VCR2•LD
can be assigned to either a VCR or a Laserdisc Player.
VCR Buttons
(TV/VCR, REW, PLAY, FF, REC, STOP ,PAUSE)
Use these buttons to control playback from a VCR or
Laserdisc Player. Also used to record onto a VCR tape.
ENTER
(Also SKIP for some RCA, GE, and ProScan TV's)
Use this button for two functions. Use as ENTER when
programming using CODE SEARCH or when entering
channel numbers for some TVs. Use as SKIP to look at
other channels during commercial breaks. Press SKIP
repeatedly to select the commercial time to skip. Change
channels and TV will return to original channel when
time runs out.
Channel and Sound
(DISPLAY, VOL, CHAN, MUTE,
PREV CH)
Use these buttons to control sound and channel changes.
Number Buttons
(0-9)
Use these buttons to directly enter channel numbers for
a TV, VCR and Cable Box or for accessing preset chan-
nels of an AM/FM tuner or enter disk and track num-
bers for a CD player. Also used for entering program
code numbers from brand lists.
Menu Buttons
(MENU•PROG, MOVE, –, +, UP, DOWN)
Use these buttons to adjust on-screen menu features and
programming information.
Code Search Button
Programs devices by searching through brand codes.
Use when code lists are not available or when the listed
code does not work with your device. See page 4.
PIP Buttons
(PIP, MOVE PIP, SWAP, FREEZE)
Use these buttons to adjust the Picture-in-Picture feature
if it is available on your TV.
2