Button Description; Setting Up Your Universal Remote - RCA RCU400KTP User Manual

Button Description
Code Search Button
Programs devices by
searching through brand
codes. Use when code
lists are not available or
when the listed code does
not work with your
device. See page 3.
Channel and Sound
(VOL, PREV CH, MUTE,
CHAN, ENTER)
Use these buttons to
control sound and
channel changes.
VCR Buttons
(TYNCR, REW, PLAY,
FF, REC, PAUSE, STOP)
Use these buttons to con-
trol tape playback from a
VCR and to record.
Custom TV Button
Sets the remote to bring up
favorite channels programmed
for a number button.
See page 6.
Device Buttons
(AUX, CABLE, VCR, TV)
Determines which device you
are controlling. Buttons light
to show which device is select-
ed.
(AUX
can be set to control
a second Cable Box,
VCR
or
TV).
Number Buttons
(0-9)
Use these buttons to
directly enter channel
numbers for a TV, VCR
and Cable Box. Also
used for entering pro-
gram code numbers from
brand lists and when
programming and using
Custom TV feature.
Setting Up Your Universal Remote
Place Batteries in the remote
1. Remove the battery compartment cover.
2. Place four AAA batteries as shown,
matching the + and - end of each battery as
indicated in the battery compartment.
3. Replace the cover.
Determine if your remote needs programming
Some RCA, GE and ProScan devices may already be pre-programmed.
2
1. Press the button of the device you want to
control (for example TV).
2. If the device turns on, press another button,
to confirm (for example CHANNEL UP).
3. If the device you selected (TV) responds,
you will not need to program the remote.
If the device you selected (TV) does
not respond, you will need to program
the remote. (See pages 3-4 for
programming instructions).
4. Repeat steps 1-3 for other devices.
AUX CABLE VCR TV
o
0 0 0
CHAN