12
Reset / Cold start
.10
After selecting the reset menu, by pressing the corresponding key it is possible to delete
seam parameters, delete seam programs and to carry out a cold start.
Press and hold "+" on keys A and D and switch on the machine, see Chapter 7.01 Main
switch.
Resetting the seam parameters
A
Press "+"on key "A".
All parameters are deleted, the display "—rE—" appears for a short time on the screen.
Resetting the seam programs
B
Press "+"on key "B".
All seam programs are deleted, the display "—rE—nA" appears for a short time on the
screen.
Cold start
D
Press "+" on key "D".
With the exception of the value for the machine class, the values of the machine control
unit are set back to their basic values, the display "—COLd—" appears for a short time on
the screen.
(only on machines with Quick-motor)
A
D
1_ 2 _ _ _ 3 _
A
B
D
Following the cold start all programmed values are reset to the status at the
time of delivery. Parameters "700", "702", "703" and "800" might have to be re-
entered after the cold start.
Adjustment
12 - 28