Table of Contents
Advertisement
snom PA1+ User Manual
Security settings
When the web interface is opened for the first time upon initialization, you will see the Security page.
When you register the first account, the SIP user name and password will be registered as the HTTP
user name and password. If you wish to change them later, you can do so on the PA1+'s web interface
> Advanced > QoS Security > HTTP Server.
Note:
-
If you do not replace the default administrator password by an individual one, an
unauthorized third party could set an administrator password unknown to you. In such a
case, you would no longer be able to switch from user mode to administrator mode.
-
If you set your own passwords, be sure to write them down and store them in a secure
place.
Without the administrator password, you will not be able to switch the web interface from
user mode to administrator mode; the settings will be inaccessible.
Without HTTP password you cannot open the web interface.
Continue with "Configuring accounts" on page 15.
14
Initializing and configuring
Advertisement
Table of Contents
