Initializing; Initializing With Dhcp; Initializing Without Dhcp - Snom PA1+ User Manual

snom PA1+ User Manual

Initializing

After the PA1+ has been connected to the network via Ethernet cable, the red LED marked "Power"
will light up. The PA1+ begins to boot.

Initializing with DHCP

The Snom PA1+ has a built-in DHCP client. When DHCP is available in the network, the PA1+ will
initialize automatically.
1. The red LED begins to blink. The PA1+ is sending the DHCP request.
2. After the PA1+ has received an IP address and other network-related settings (netmask, IP
gateway, DNS server, etc.) from the DHCP server, the red LED stops blinking and glows red
steadily, indicating that the application is starting up.
3. When the PA1+ boot-up process is finished and the web interface is available, the green LED
lights up in addition to the red one.
4. Briefly press the button labelled "IP/Reset" to listen to the oral announcement of the IP address
(in English) over the loudspeaker or headset.
5. Open a web browser on a PC connected to the same network as the PA1.
6. Type the IP address into the address bar after http:// and press "Enter" to open the PA1's web
interface.
7. Continue with "Security settings" on page 14.

Initializing without DHCP

If your network does not support DHCP, the Snom PA1+ will boot with the default settings. Please
obtain the network IP address and netmask and, if applicable, other required network settings from
your network administrator. The default settings are:
IP address: 192.168.0.2
Netmask: 255.255.0.0
1. The red LED begins to blink. The PA1+ is sending the DHCP request.
2. Press the button labelled "IP/Reset". The red LED continues to blink.
Note: It may take a few minutes before the PA1+ aborts the DHCP request and starts the
application with the default settings.
3. When the application is starting up with the default network settings, the red LED stops to blink
and glows red steadily.
4. When the PA1+ boot up process is finished and the web interface is available, the green LED lights
up in addition to the red one. You can now change the default settings manually.
Note: Briefly press the button labelled "IP/Reset" to listen to the oral announcement of
the default IP address (in English) over the loudspeaker or headset.
5. Open a browser on a computer connected to the same network as the PA1+, and type the default
IP address in the address bar: http://192.168.0.2. The PA1+ web interface will be loaded into the
browser.
6. Click Advanced in the menu on the left side of the window. The Advanced page opens to the
Network tab.
12
Initializing and configuring