Recording
1
Set the drive mode dial to [
2
Decide on the composition, and press the shutter
button halfway.
•
Auto Focus will detect focus areas on the screen.
(Excluding the edges of the screen)
•
If no areas on the screen can be brought into focus, the
focus display ( A ) will flash. Recording is not possible in
this case.
3
Press the shutter button fully to start recording.
•
The focus point changes automatically while recording.
When the icon ( B ) disappears, recording automatically ends.
From the time you press the shutter button halfway until the end of recording:
•
Maintain the same distance to the subject and the same composition.
•
Do not operate the zoom.
•
A motion picture in MP4 format will be recorded. (Audio will not be recorded.)
•
When [Auto Review] is enabled, a screen that lets you select the desired focus area will
be displayed. (P30)
•
If the surrounding temperature is high, recording is performed continuously with the Post Focus
function, or the temperature of the camera rises, [
stop halfway through to protect the camera. Wait until the camera cools down.
Selecting the desired focus area and saving a picture
1
Select an image with the [
2
Touch the desired focus area.
•
If a picture that is in focus is not available for the selected
area, a red frame will be displayed. You cannot save a
picture in this case.
•
You cannot select the edges of the screen.
Button operation
3/4/2/1/
[Fn1]
[Fn2]
[MENU/SET]
30
DVQX1015 (ENG)
].
] icon on the playback screen, and press 3.
Touch operation
Touching
] may be displayed and recording may
Description of operation
Selects a focus area.
•
It cannot be selected during enlarged display.
Enlarges the display.
Reduces the display (during enlarged display).
Switches to the Focus Stacking function. (P31)
In-focus portions are highlighted with colour.
([Peaking])
Saves the picture.
4:3
4K
B
残
Fn2
A
5
04
m
s
5
04
m
s
Fn1