Preparation/Basic "Quick Start Guide"
5
Attaching/Removing the Lens
•
Change lenses where there is not a lot of dirt or dust.
•
Do not press the lens release button A when you attach a lens.
∫ Detaching the lens
1
Attach the lens cap.
2
While pressing on the lens release button B, rotate
the lens toward the arrow until it stops and then
remove.
•
Hold the part around the base of the lens to rotate it.
6
Opening the Monitor
At the time when this camera is purchased, the monitor is stowed in the camera body.
Bring out the monitor as shown below.
1 Open the monitor. (Maximum 180o)
2 It can be rotated 180o forward.
3 Return the monitor to its original position.
•
Only rotate the monitor after opening it wide enough, and be careful not to use
excessive force as it may be damaged.
•
When not using the monitor it is recommended that you close it with the screen facing inward to
prevent dirt and scratches.
12
DVQX1015 (ENG)