Inflating Instructions; Fishing Rod Holder Use; Seat Installation; Seat Booster Pad Installation - Intex EXCURSION PRO Owner's Manual

Inflating Instructions

Before starting, locate a clean area free of stones or other sharp objects. Unroll the kayak so
it is laid out flat, and locate your pump.
Use a hand or foot operated air pump to inflate the boat. Do not use high-pressure air
compressors. Adults should inflate the chambers following the numerical sequence marked
on the valves. It is very important to follow the numerical sequence; failure to do so will result
in an improperly inflated boat. Fill each chamber until it is stiff to the touch but NOT hard.
Use the enclosed pressure gauge to check the main chamber for
proper inflation. The pressure gauge indicator should be in the
green area for a properly inflated chamber. DO NOT OVER
INFLATE. Fill with cold air only.
IMPORTANT: Air temperature and weather condition do affect the
internal air pressure of inflatable products. In cold weather the product
will lose some pressure due to the fact that the air will contract. If this
occurs, you may want to add a little air to the product. However, in hot
weather, the air will expand. You must let some air out to prevent the
product from failing due to overpressure.

Fishing Rod Holder Use

1. Slide the end cap over the end of the fishing rod.
2. Insert the end cap into the fishing rod holder.
Seat Installations
1. Inflate each seat slowly to about 75% of its capacity.
2. Place the seat on the velcro stripe located on the floor according to the user size. Then
hook the side strap to the D-ring on the side of the hull and adjust the strap length.
3. Finish inflating the seat slowly until it is firm to the touch but NOT hard. DO NOT OVER
INFLATE!
4. To disassemble the seats, deflate the seats first and reverse the installation procedures.

Seat Booster Pad Installation

The seat booster pad provides an elevated seating during solo fishing configuration. Inflate
the booster pad first and place it underneath the inflated seat.

Footrest Assembly

SAVE THESE INSTRUCTIONS
(84PO) EXCURSION PRO KAYAK ENGLISH 4.875" X 7.25" 06/23/2018
1
Page 6
2
84
PO
1
2
Fishing rod
End cap
Fishing rod
holder
3