Table of Contents
Advertisement
Operating the product
5.20 End of programme
When the programme is over the End of Programme indicator illuminates and a
buzzer is heard.
If you do not press any button for 2 minutes, the machine will switch to standby
mode. Display and all indicators are turned off.
If you press any button or turn the Programme Selection knob when the machine
is in standby mode, programme steps that are completed will appear on the display.
5.21 Your machine features a "Standby Mode".
After you switch on your machine with On-Off button, if no programme is started
or no other procedure is performed at the selection step or no action is taken within
approx. 2 minutes after the selected programme ends, your machine will switch to
energy saving mode automatically. Also, if your product has a display that shows
programme time, this display will be completely turned off. If you turn the Programme
Selection knob or touch any button, lights and display will switch back to previous
condition. The selections which you make when exiting from the energy efficiency
may change. Please check the correctness of your selections before starting the
programme. If necessary, please make your settings again. This is not an error.
58 / EN
Washer-Dryer / User's Manual
Advertisement
Table of Contents
