CORRECT BURNER POSITION
Fig. 5
Correct burner position
BOILER PLATE
Fig. 6
Boiler plate
MODEL
FGP 50/2 EVO-2
FLAME TUBE LENGTH
Flame tube length must be selected based on the specifications supplied by boiler manufacturer and, in any case, it
must be greater than the thickness of the boiler door included its insulation.
In case of boilers with flame inversion or front flue combustion chambers, it is necessary to insulate the area between
the flame tube and front door with refractory material. This protection material must not impede flame tube extraction.
MODEL
FGP 50/2 EVO-2
** For different flame lengths, please contact our Technical-Sales Department.
FGP 50/2 EVO-2
INSTALLATION
L min
L max
mm
205
TC
TL **
mm
250
The burner is designed to work only in the positions as
shown in the picture.
Any other position could compromise the correct working
of the burner.
Crossed positions are forbidden for safety reasons.
* Suggested dimension of connection between burner
and generator.
M
226
M10
335
070002_3_B
N min
N *
160
160
N max
180
7