Installation; Safety; Preliminary Checks; Check Supply, Transport, Packaging, Storage - FBR FGP 50/2 EVO-2 Installation, Use And Maintenance Instructions

INSTALLATION

SAFETY

Before burner installation, clean carefully all around the area where the burner will be installed and arrange the correct
lighting of the room.
The installation, adjustment and maintenance of the appliance must be carried out by professionaly
qualified person in compliance with the standards and regulations of the laws in force as a wrong
WA R NIN G
installation may cause damages to people, animals and things for which the Manufacturer will not be
responsable.
Before starting installation, maintenance and disassembly turn off the electrical supply and check that it is
not possible to turn accidentally the main switch on, close fuel inlet valves and make sure they could not
WA R NIN G
accidentally be opened.

PRELIMINARY CHECKS

CHECK SUPPLY, TRANSPORT, PACKAGING, STORAGE

CHECK SUPPLY
Check that the supply is complete and without transport damages. After removing all the packaging,
WA R NIN G
check the integrity of the contents. If in dubt do not use the burner and contact the supplier.
TRANSPORT
The transport weights of the burner and the gas train are indicated in the technical data.
STORAGE
Observe the environment temperatures which are allowed for storage and indicated in the technical data.
The packaging materials must not be abandoned as they may cause danger and pollution, but they should
be collected and left in a appropriate place.
WA R NIN G

BURNER CHARACTERISTICS CHECK

Check that the capacity of the boiler is within the operating range of the burner.
WA R NIN G
Violation, removal or loss of the data plate of the burner and any other components compromise the
correct identification of the burner and hinder the installation and maintenance operation.
WA R NIN G
FGP 50/2 EVO-2
INSTALLATION
The data plate of the burner shows:
A. the model;
B. fuel family;
C. fuel category;
D. fuel 1 pressure (if appicable, fuel 2 pressure);
E. minimum and maximum thermal power;
F. the data for electrical supply, absorbed electrical power
and electric protection degree;
G. the code;
H. the serial number.
Moreover the data plate includes CE labeling and the list
of countries where the certification is applicable.
070002_3_B
6