Spare Parts; Ordering Data - Siemens SIMOTICS DC 1GG7 Operating Instructions Manual

Spare Parts

10.1

Ordering data

In addition to the exact part designation, please specify the machine type and serial number
in all orders for spare parts. Ensure that the spare part designation matches that on the spare
parts list and make sure you use the appropriate part number as well.
Example
● Bearing shield, drive end (Part 5.00)
● Machine type
● Serial number
The machine type and serial number can be found on the rating plate. The serial number is
also stamped on the end face of the shaft extension at the drive end.
Note
The graphical representations in this chapter show schematic diagrams of the basic versions.
They are used for spare parts definitions. The supplied version may differ in details from these
representations.
Carbon brushes
The order number for carbon brushes and / or the brush designation is specified on the rating
plate. You will also find the brush type and manufacturer's mark on the upper part of the brush.
Terminal box
If several terminal boxes are mounted on the machine, please also indicate the type
designation of the terminal box in addition to details of part designation and part number
according to the legend, as well as type and serial number of the motor when ordering spare
parts.
Example
● Terminal box type
● Terminal box cover (part 20.30 )
● Serial number of the motor
● Machine type
SIMOTICS DC 1GG7
Operating Instructions 02/2016
10
103