Table of Contents
Advertisement
Help Guide
Digital Still Camera
DSC-WX800
ISO
Sensitivity to light is expressed by the ISO number (recommended exposure index). The larger the number, the higher
the sensitivity.
MENU →
(Camera Settings1) → [ISO] → desired setting.
1
Menu item details
Multi Frame NR:
Combines continuous shots to create an image with less noise. Press the right side to display the setting screen, then
select a desired value using the top/bottom sides of the control wheel.
Select the desired ISO number from ISO AUTO or ISO 100 – ISO 12800.
ISO AUTO:
Sets the ISO sensitivity automatically.
ISO 80 – ISO 6400:
Sets the ISO sensitivity manually. Selecting a larger number increases the ISO sensitivity.
Hint
You can change the range of ISO sensitivity that is set automatically in [ISO AUTO] mode. Select [ISO AUTO] and press the right
side of the control wheel, and set the desired values for [ISO AUTO Maximum] and [ISO AUTO Minimum]. The values are also
applied when shooting in [ISO AUTO] mode under [Multi Frame NR].
Note
When [Multi Frame NR] is selected, the flash, [D-Range Opt.], or [Auto HDR] cannot be used.
When [Picture Effect] is set to other than [Off], [Multi Frame NR] cannot be selected.
[ISO AUTO] is selected when using the following functions:
[Intelligent Auto]
[Superior Auto]
[Scene Selection]
[Sweep Panorama]
The higher the ISO value, the more noise will appear on the images.
When shooting movies, ISO values between 80 and 6400 are available.
When you use [Multi Frame NR], it takes some time for the product to perform the overlay processing of images.
When you select [ISO AUTO] with the shooting mode set to [P], [A], [S] or [M], the ISO sensitivity will be automatically adjusted
within the set range.
4-745-585-11(1) Copyright 2018 Sony Corporation
111
Advertisement
Table of Contents
