Table of Contents
Advertisement
Help Guide
Digital Still Camera
DSC-WX800
Func. of Touch Oprtn: Touch Shutter
The camera automatically focuses on the point you touch and shoots a still image.
Set MENU →
(Setup) → [Touch Operation] to [On] in advance.
Select MENU →
1
Touch the
icon on the monitor while the shooting screen is displayed.
2
The mark to the left of the icon turns orange.
To cancel [Touch Shutter], touch the
Touch the subject to focus on.
3
When the subject you touched is in focus, a still image is recorded.
Hint
You can operate the shooting functions below by touching the monitor:
Shooting burst images using the touch shutter
When [Drive Mode] is set to [Cont. Shooting] or [Spd Priority Cont.], you can record burst images while touching the monitor.
Shooting continuous bracket images using the touch shutter
The product shoots three images while automatically shifting the exposure from base, to darker, and then to lighter. When
[Drive Mode] is set to [Cont. Bracket], keep touching the monitor until the shooting ends. After the recording you can select the
image you prefer.
Note
The [Touch Shutter] function is unavailable in the following situations:
When the shooting mode is set to [Movie]
When the shooting mode is set to [Sweep Panorama]
During [Smile Shutter] mode
When [Focus Area] is [Flexible Spot]
When [Focus Area] is [Expand Flexible Spot]
While using the digital zoom function
While using the [
Related Topic
Touch Operation
(Camera Settings2) → [Func. of Touch Oprtn] → [Touch Shutter].
icon again.
Clear Image Zoom]
4-745-585-11(1) Copyright 2018 Sony Corporation
76
Advertisement
Table of Contents
