Bathroom Controller (Yprs67Xbn) - Bosch BC2680RA5 Owner's Manual

Bathroom Controller (YPRS67XBN) <Optional>
What is actually displayed depends on how the water heater is set.
Display
Call Button
To sound alarm at all
remote controls. ( p.15)
Priority Button
To transfer control from
another remote.
( p.18)
* Before use, remove the protective sheet from the remote controller surface.
The illustration below shows the remote controller display.
What is actually displayed depends on how the water heater is set.
Burner On Indicator
When burning, the
indicator is lit.
( p.17, 21)
Priority Indicator
When this indicator is lit,
the hot water temperature
can be set. ( p.18)
Operating Instructions
Display
Error Code
A number will flash if
a failure occurs.
Bath Fill Temperature Indicator
When this indicator is lit,
bath fill temperature is
displayed. (
Temperature setting
Bath Fill Temperature setting
Bath Fill Volume setting
( p.29)
Setting Buttons
For setting the hot
water temperature
( p.16 -17)
For other settings.
Operation Button
For turning the water
heater on or off.
Bath Fill Button
To activate Bath Fill.
To set Bath Fill
temperature.
( p.20 -22)
p.20 -22)
(Eg.: 40°C)
(Eg.: 40°C)
( p.20 -22)
11