Using Steady Pix; Using The Video Light (Cc6374 Only) - RCA CC6364 User Manual

Recording
MENU STEADY PIX
dial button
Power switch
Video light
40

Using Steady Pix™

Digital Image Stabilization is used to compensate for
unstable images cause by camera shake, especially at
high magnifications.
To turn on image stabilization, press the STEADY PIX
button. ( appears.)
To turn off image stabilization, press STEADY PIX
again. (The icon disappears.)
Notes:
Accurate stabilization may not be possible if
hand shake is excessive, or when recording
the following:
• subjects with vertical or horizontal
stripes.
• dark or dim subjects.
• subjects with excessive backlighting.
• scenes with movement in various
directions.
• scenes with low-contrast backgrounds.
Switch off stabilization when the camcorder is
mounted to a tripod.
The icon blinks or disappears if image
stabilization can't be used.

Using the Video Light (CC6374 only)

To brighten the scene when natural lighting is too
dim, the camcorder uses a built-in video light.
You can turn on the video light at all times, set to
turn on automatically when the camcorder senses
additional light is needed, or turn off altogether.
Set the LIGHT switch as desired:
OFF Turns off the light.
AUTO Automatically allows the camcorder to
turn on the light when there is
insufficient lighting on the subject.
ON Keeps the light on at all times as long
as the camcorder is turned on.
Chapter 3