Wireless - Dell P88F Service Manual

Table 10. Power management (continued)
Options
Block Sheep
Battery Charge Configuration
Enable Advanced Battery Charge Configuration
Peak Shift
Intel Speed Shift Technology
Lid Behaviour

Wireless

Allows you to enable or disable the internal wireless devices. All the options are enabled by default.
Table 11. Wireless
Options
WLAN
Bluetooth
72 System setup
Descriptions
● Disabled
● Every Day
● Weekdays
● Select Days
This options lets you to block entering Sleep (S3) mode in the
operating system . Disabled by default.
Allows you to select the charging mode for the battery. This
functionality allows the system to run on battery during peak
power usage hours. The options are:
● Adaptive—enabled by default
● Standard—Fully charges your battery at a standard rate.
● ExpressCharge—The battery charges over a shorter time
using Dell's fast charging technology.
● Primarily AC use
● Custom
This option enables you to maximize the battery health. By
enabling this option, your system uses the standard charging
algorithm and other techniques, during the non work hours to
improve the battery health.
Enable Advanced Battery Charge Mode- is disabled
This option enables you to minimize the AC power
consumption during the peak power times of day. After you
enable this option, your system runs only in battery even if the
AC is attached.
● Enable peak shift—is disabled
This option is used to enable Intel Speed Shift Technology
support.
Default setting: Enabled
● System input while lid closed: This setting allows system to
maintain functionality of keyboard and touchpad. Disabled
by default.
● Power on Lid open: This setting allows the system to
power up from the off state whenever the lid is open or
closed. Enabled by default.
Descriptions
Allows enabling/disabling of internal WLAN device
Allows enabling/disabling of internal Bluetooth device