ADA INSTRUMENTS WALLSCANNER 120 PROF Operating Manual page 10

10
English
lits up, the detector is out of temperature range. Swtiched off the detector
and wait until the tool reaches the ambient temperature. Then switch it
on again. Ambient temperature must correspond to the working tem-
perature of the detector.
IMPORTANT WARNING
When the icon lights up on the display and the indicator above
the button (5) flashes, it is necessary to re-measure. Remove the
tool from the wall or the place over the object to be measured and
place it in another place.
MAINTENANCE AND SERVICE
Wipe away debris or contamination with a dry, soft cloth. Do not use clean-
ing agents or solvents. In order not to affect the measuring function, de-
cals/stickers or name plates, especially metal ones, may not be attached
in the sensor area on the front or back side of the measuring tool. Do not
remove contact pads (10) on the back side of the measuring tool.
WARRANTY
This product is warranted by the manufacturer to the original purchaser to
be free from defects in material and workmanship under normal use for a
period of two (2) years from the date of purchase. During the warranty pe-
riod, and upon proof of purchase, the product will be repaired or replaced
(with the same or similar model at manufactures option), without charge
for either parts of labour. In case of a defect please contact the dealer
where you originally purchased this product. The warranty will not apply
to this product if it has been misused, abused or altered. Without limiting
the foregoing, leakage of the battery, bending or dropping the unit are
presumed to be defects resulting from misuse or abuse.
EXCEPTIONS FROM RESPONSIBILITY
The user of this product is expected to follow the instructions given in op-
erators' manual. Although all instruments left our warehouse in perfect