System Settings - Nakamichi DRAGON 11.4.6 Owner's Manual

6.5 System Settings

A. Wireless Settings
The System tab provides access to essential general operation settings.
By default, DRAGON utilizes an auto-switching 5GHz wireless frequency to communicate with its wireless subwoofers and
surround speakers. In rare instances, nearby wireless networks (e.g. Home Wi-Fi) may conflict with DRAGON's wireless
transmission, resulting in audio interruptions from the surround speakers and/or subwoofers.
You can change the following settings to optimize DRAGON's wireless capabilities for your home's environment.
These settings should only be changed if you are facing audio interruptions from DRAGON's wireless surround speakers or subwoofers.
Scan the QR Code or visit bit.ly/dragon-wireless-optimization for recommendations
tailored to your home.
Setting
Subs + Surr Wireless
Freq (Step 1)
Wireless Freq Strength
(Step 2)
Default: 2
Description
Subwoofer + Surround Speaker Wireless Frequency
Default: DRAGON communicates using the 5.8GHz bandwidth
Auto 1: DRAGON communicates using the 5.2GHz bandwidth
Wireless Frequency Strength
Varying degrees of wireless communication strength (1, 2, 3, 3+). Use the setting that
enables smooth wireless communication between DRAGON's system components.
49