Remote Functions - Nakamichi DRAGON 11.4.6 Owner's Manual

Hide thumbs Also See for DRAGON 11.4.6:
Table of Contents

Advertisement

4.1 Remote Functions

A.
Remote Functions at a Glance
Power On / Off DRAGON
After setting up a HDMI connection with your
TV, always power on DRAGON by using your
TV or content device's remote control power
ON button. Always use your TV's remote
control to power OFF the entire system.
OUTPUT: Plays audio content using external
devices connected to DRAGON's Optical/Aux
Out. Dragon will be muted (Section 13.2).
Press "ALL CH STEREO" when listening to
stereo content (e.g. music).
All Channel Stereo (Recommended):
Upmixes stereo playback to surround
speakers. Best for music, YouTube™ and
content with minimal rear surround effects.
Stereo Only: Enables playback with main
unit + subwoofers only (no surround).
INFO button and Navigation:
Displays essential info on TV screen and
DRAGON's LED display (pg 39-40).
HOME: Access On-Screen Display (OSD)
Settings. Use
to navigate OSD
menu (pg 42).
When OSD is not active:
Bluetooth playback controls.
Favorite Settings 1 and 2
Save and load personalized settings. See pg
38 for details.
For expanded remote control guide, scan QR
code or visit: bit.ly/dragon-remote-guide
TV
HDMI 2
HDMI 3
HDMI 4
OPT
USB
AUX
OUTPUT
ALL CH
SURROUND
STEREO
INFO
HOME
RETURN
SUB
ENTER
SUB
BASS
VOL
SURROUND SPEAKERS
CR
TR
SS
SB
CR
TR
SS
FAVORITE SETTINGS
1
2
ADAPTIVE HEIGHT DISPERSION
FH
RH
RH
FH
25
Mute or Unmute DRAGON.
Input Sources
Press "TV" to listen to audio from devices
connected to TV or streaming apps built into TV
(via ARC / eARC).
For other devices connected to DRAGON,
press "HDMI 2 / 3 / 4 / Bluetooth / Optical /
Aux".
Equalizer & Night Mode
Experience audio equalizers tailored for various
content (Section 4.2B, pg 29).
Press SURROUND when watching Dolby, DTS or
Multi-Ch PCM content for a full surround with
height experience.
DOLBY Surround: For Dolby/LPCM/PCM
audio
DTS Neural:X: For DTS audio.
STUDIO: On the main unit are used to enhance
the left and right channels, creating a powerful
front presence.
DTS DIRECT / NATIVE: Directly decodes 2.1 / 5.1
/ 7.1 channel without upmixing.
(See (Section 4.2A, pg 27) for more details)
Subwoofers, Tonal & Surround Adjustments
Enable more ( +SUB) or less ( -SUB)
subwoofers. Default = Quad Subs Active.
Bass, Master Volume: Push the buttons up or
down to adjust the levels.
Center (CR), Treble (TR), Surround Side (SS),
Surround Back (SB), Front Height (FH) and Rear
Height (RH) Channel Volume. See (Section
5.1-5.5, pg 32-36) for more details.
AHD:
Configure
DRAGON's
technology for enhanced height effects. See pg
37 for details.
proprietary

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents