Cisco PWR-C1-1900WAC-P Installing page 11

Installing a Power Supply
Figure 9: Attaching the Ground Lug and Wire Assembly
1
Step 6 Using a ratcheting torque screwdriver, torque the ground-lug screws to 60 lbf-in. (960 ozf-in.).
Step 7
Connect the other end of the grounding wire to an appropriate grounding point at your site or to the rack.
Installing the DC Power Supply in the Switch
Before you begin
Before installing the power supply, see the
Attaching the single-hole 2
ground lug
Installation Guidelines, on page
Installing the DC Power Supply in the Switch
Attaching the dual-hole
ground lug
5.
Installing a Power Supply
11