Plantronics Poly Calisto 5300 - Speakerphone Manual

Also See for Poly Calisto 5300:

User manual (8 pages)

User manual (9 pages)

User manual (6 pages)

Table of Contents

Contents

1 Controls and status lights
2 Setup
3 Charge
- 3.1 Check battery status
- 3.2 Charge
4 Daily Use
5 Support
6 Documents / Resources
- 6.1 Download manual

Plantronics Poly Calisto 5300 - Speakerphone Manual

Controls and status lights

A corded, portable speakerphone with mobile connectivity.

Controls and status lights

	Volume
	Mute
	LED
	Press to interact with Microsoft Teams (app required)
	Call button
	Kensington lock port
	Power
	Bluetooth switch (speakerphone)
	Bluetooth button (BT600 adapter)

USB Bluetooth adapter (adapter model only)

NOTE Adapter design may vary

Standard LEDs
USB LEDs	What they mean
Flashing red and blue	Pairing
Solid blue	Headset connected
Flashing blue	On a call
Solid red	Mute active
Flashing purple	Streaming media from computer
*LEDs when Microsoft Teams is detected**
USB LEDs	What they mean
Flashing red and blue	Pairing
USB LEDs	What they mean
Solid purple	Headset connected
Flashing blue	On a call
Solid red	Mute active
Pulsing purple	Microsoft Teams notification

NOTE *Requires Microsoft Teams application

Setup

Mobile setup

To pair your mobile device with your speakerphone, slide the Power switch towards the Bluetooth icon to the right for 2 seconds. You hear "pairing" and the LED next to the Bluetooth icon flashes red and blue.

Activate Bluetooth on your phone and set it to search new devices, select Poly CL5300 Series.
Pairing is successful when you hear "pairing successful" and the LED goes out.

Corded setup

Connect the USB cable from the USB port on the speakerphone to the USB port on your computer.
Corded setup

USB adapter setup (BT600 models only)

Your Bluetooth USB adapter comes pre-paired to your speakerphone.

Turn on your speakerphone and insert the Bluetooth USB adapter into your computer.

2 Pairing is successful when you hear "pairing successful" and the USB adapter turns solid blue. NOTE Adapter design may vary.

Pair USB adapter again
Your USB adapter is pre-paired to your speakerphone. In the event that your adapter is disconnected or bought separately, manually pair the adapter to your headset.

Insert the Bluetooth USB adapter into your laptop or computer and wait for your computer to recognize it.
Put your speakerphone in pair mode by sliding the Power switch towards the Bluetooth icon to the right for 2 seconds. You hear "pairing" and the LED next to the Bluetooth icon flashes red and blue.
Put your adapter into pair mode by pressing and holding the recessed pair button with a pen or paperclip until the adapter flashes red and blue.

NOTE Adapter design may vary

Pairing is successful when you hear "pairing successful; PC connected" and the adapter LED turns solid blue.

Load software

Download Plantronics Hub for Windows/Mac by visiting poly.com/software. This allows you to customize your device behavior through advanced settings and options.

Charge

Check battery status

To check the battery status of your speakerphone, slide the power button to the right and release.

Charge

Charge the speakerphone via USB using your computer or a USB AC adapter (not provided). The Power switch LED flashes while charging and turns off when fully charged. Allow 3.5 hours for a full charge.
Charge