Contents Controls and status lights Setup Mobile setup Corded setup USB adapter setup (BT600 models only) Load software Charge Check battery status Charge Daily Use Power Answer or End a call Place a call on hold Mute/Unmute Volume Support...
Controls and status lights A corded, portable speakerphone with mobile connectivity. BT600 models only Icon LEDs Function Sequential white lights Volume increase/decrease Volume buttons Mute button Solid white Power on Solid red Microphone muted Call button Flashing green Incoming call Solid red In a call Kensington lock port...
Setup Mobile setup To pair your mobile device with your speakerphone, slide the Power switch towards the Bluetooth icon to the right for 2 seconds. You hear "pairing" and the LED next to the Bluetooth icon flashes red and blue. Activate Bluetooth on your phone and set it to search new devices, select Poly CL5300 Series.
Load software Download Plantronics Hub for Windows and Mac by visiting plantronics.com/software. This allows you to customize your device behavior through advanced settings and options.
Charge Check battery status To check the battery status of your speakerphone, slide the power button to the right and release. Charge Charge the speakerphone via USB using your computer or a USB AC adapter (not provided). The Power switch LED flashes while charging and turns off when fully charged. Allow 3.5 hours for a full charge.
Daily Use Power Slide the Power button to the right to power on. The speakerphone LED illuminates white and you hear "power on." Answer or End a call A short press of the Call button answers or ends a call. Place a call on hold To place a call on hold, press the Call button for 2 seconds.