Date And Time Display; Set The Date And Time - RCA CC421 User Manual

Date and Time Display

Set the Time and Date
1. Attach a power supply (battery or
adapter/charger) to the camcorder.
2. Press and hold the small button on
POWER and place in CAMERA.
3. Press DATE / T IME to display the date
and time in the viewfinder. A flashing
cursor lets you know which part of
the display you are setting.
Note: If flashing cursor does not appear,
press and hold DATE/TIME and then press
STOP/EJECT.
4. Repeatedly press F.FWD or REW until
correct month appears. Press and hold
the button to advance the digits faster.
26
DATE/TIME
POWER
REVIEW DISPLAY RESET DATE TITLER CAMERA
/TIME
12:00AM
1/ 1/95
REW (Rewind)
OFF VCR AV DUB REW PLAY
POWER – TITLE SEL
5. When the correct digit is displayed,
press STOP/EJECT. The cursor will
move to the next part of the display.
6. Repeat steps 4 and 5 to set the correct
month, day, year, hour, minute(s), and
AM/PM.
7. After setting AM or PM, press
DATE/TIME to remove the flashing
cursor and start the internal clock.
To Correct the Date or Time
To correct the date or time, press and
hold DATE/TIME and then press
STOP/EJECT. The display will appear in
the viewfinder along with the flashing
cursor. Use F.FWD and REW to correct
the time or date. Press DATE/TIME to
remove the flashing cursor and start the
clock.
F.FWD (Fast Forward)
STOP/EJECT
F.FWD STOP/EJECT
+ EDIT – ADV