Table of Contents
Advertisement
en use
6 Before the first
use
B prepare the device for use.
6.1 Start empty wash cycle
Your device has been thoroughly
tested before leaving the factory. To
remove any residual water, wash
without laundry for the first time.
Open the program selectorClean
1.
drumplace.
Close the door.
2.
Pull out the detergent drawer.
3.
Fill about 1 liter of tap water into
4.
chamber II.
20
Pour powder detergent into
5.
compartment II.
To avoid foaming, use only half the
amount of detergent recommended
by the detergent manufacturer for
light soiling. Do not use wool
detergent or mild detergent.
Push in the detergent drawer.
6.
To start the program, click Start/
7.
Reloadto press.
aThe display shows the remaining
program duration.
aThe display shows after program
mende: "End".
Start the first wash cycle or open
8th.
the program selector Out ofto
turn off the device.
→ "Basic operation", page 31
Advertisement
Table of Contents
