RAID Configuration
The introduction of RAID levels and types are as below:
RAID 0
breaks the data into blocks which are written to separate hard drives.
Spreading the hard drive I/O load across independent channels greatly
improves I/O performance.
RAID 1
provides data redundancy by mirroring data between the hard drives and
provides enhanced read performance.
RAID 5
provides data striping at the byte level and also stripe error correction
information. This results in excellent performance and good fault tolerance.
RAID 10 uses four hard drives to create a combination of RAID 0 and 1 by forming a
RAID 0 array from two RAID 1 arrays.
RAID level comparison
Minimum # drives
Data protection
Read performance
Write performance
Capacity utilization
⚠
Important
All the information/ volumes/ pictures listed in your system might differ from the
illustrations in this appendix.
Intel RAID User Guide
If you'd like to know more instructions on how to set up Intel RAID,
please refer to
http://download.msi.com/manual/mb/IntelRAID.pdf
or scan the QR code to access.
RAID 0
RAID 1
2
2
None
Excellent
Excellent
OK
Excellent
Good
100%
50%
RAID 5
RAID 10
3
4
Excellent
Excellent
Good
OK
OK
Good
67%~(1-1/n)
50%
RAID Configuration
51