Table of Contents
Advertisement
Fitting under a counter
By removing the dishwasher's worktop, you
can install it under a close fitting sink unit or a
pre-existing top.
Levelling
Good levelling is essential for correct
closure and sealing of the door.
When the appliance is correctly levelled,
the door will not catch on either side of the
cabinet.
All manuals and user guides at all-guides.com
Unscrew the two screws
at the rear.
Be sure that once the appliance has been
installed, it is easily accessible for the service
engineer in the event that a repair is required.
Push the top backwards
about 1 cm.
Check if the dishwasher
is levelled.
Lift top at the front and
remove it.
If not, loosen or tighten
the adjustable feet until
the appliance is
perfectly levelled.
23
Advertisement
Table of Contents
