Quintum A Series A400 Supplementary Manual

End of Sale/End of Life for Tenor A400/A800 Products
The Tenor A Series family of products (A400 and A800) is being replaced by the new
Tenor AS and AX Series products. The AS Series products were launched on May 3,
2004, and the AX Series products on June 28, 2004
The last day to order Tenor A Series products will be August 31, 2004.
Introduction
The Tenor A Series family of digital VoIP MultiPath Switches was first introduced in June
2000. These products have been successfully deployed and providing reliable, high
quality voice over IP services in enterprise and service provider applications in over 70
countries throughout the world.
End of Sale and End of Life
This document outlines the End of Sale (EoS) and End of Life (EoL) plan for the Tenor A
Series family of products. These products include the A400 and A800 Tenor VoIP
MultiPath switches, and variants based on this chassis.
The reason for this EoL notice is introduction of the new AS and AX Series of products
which will replace the A Series products. The AS and AX Series products offer a wider
range of configurations plus enhanced capabilities to better meet the needs of our
customers.
Recommended Product Migration
The recommended replacements for Tenor A Series products are shown in the table
below -
A Series Product
Tenor A400 VoIP MultiPath Switch
Tenor A800 VoIP MultiPath Switch
In addition to the direct replacement products shown above the AS and AX Series
feature a number of new configurations, including VoIP MultiPath Switches and VoIP
Gateways, with up to twenty four FXS/FXO ports and up to twenty four VoIP channels.
Please review Quintum product literature for details of the complete range of Tenor AS
and AX Series products.
Quintum Technologies Inc.
71 James Way,
Eatontown,
New Jersey 07724 U.S.A.
End of Life Announcement
Nearest AS/AX Series Equivalent
ASM400 VoIP MultiPath Switch
AXM800 VoIP MultiPath Switch
1
Page