Lenovo Legion Pro 7i Hardware Maintenance Manual page 62

Figure 53. Install a new keycap
Step 2. Push down the upper edge of the keycap until it fits into place.
Note: Make sure the keycap is firmly installed and does not move easily.
Remove scissors
The scissors supplied in the keycap kit can only be used to replace those underneath keys W, A, S, and D.
Step 1. Use one end (with two prongs) of the detachment tool to detach the lower part of the scissors.
Figure 54. Remove damaged scissors
Step 2. Take the damaged scissors out.
Install new scissors
Step 1. Choose the right replacement scissors and make sure the damaged scissors are removed.
The scissors underneath the keys W, A, S, and D are not compatible with those for other keys.
Scissors supplied with the keycap kit can only be used to replace those underneath keys W, A, S,
and D.
56
Hardware Maintenance Manual