Lenovo Legion Pro 7i Hardware Maintenance Manual page 59

"Remove the memory module" on page 36
"Remove the DC-in bracket" on page 37
"Remove the thermal module" on page 37
"Remove the system board and the I/O board cable" on page 41
"Remove the strip cover" on page 51
Step 1. Remove four screws.
Figure 48. Remove four screws
Screw specifications
M2 x L3.5
M2.5 x L7
Step 2. Remove two screws and then lift the LCD module.
Figure 49. Lift the LCD module
Screw specifications
M2.5 x L7
Step 3. Take out the EDP cable and then remove the LCD module.
Number of screws
2
2
Number of screws
2
.
Chapter 4 Removing a FRU or CRU
53