Adjusting The Pc Image Automatically; Adjusting The Pc Image Manually - Sharp LC-39LE651E Operation Manual

Connecting a PC
1
Adjusting the PC image
automatically
1
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available DVI/VGA conversion
cable, etc.
Press b to select PC-IN from AV selection,
1
and then press OK.
2 Press MENU key.
Press ► key to select Setup and press OK.
3
Press ▼ key to select Picture → more... and press
4
OK.
Press ► key to select PC IN display and press
5
OK.
Press ▼ key to select Auto Adjustment and
6
press OK.
NOTE
•
When connecting a PC and select PC-IN source, the "Auto
adjustment" is executed automatically.
•
"Auto adjustment" may fail if the PC image has low
resolution, has unclear (black) edges, or is moved while
executing "Auto adjustment".
•
Be sure to connect the PC to the TV and switch it on before
starting "Auto adjustment".
•
"Auto adjustment" can be executed only when inputting
analogue signals through the "PC IN" terminal.

Adjusting the PC image manually

Ordinarily you can easily adjust the picture as necessary
to change image position using "Auto Adjustment".
In some cases, however, manual adjustment is needed
to optimise the image.
Press b to select PC-IN from AV selection,
1
and then press OK.
2 Press MENU on the remote control.
Select Setup → Picture → more..., then press
3
OK.
Press ► key to select "PC IN
4
press OK.
Press ▲/▼ key to select the desired item, then
5
press OK.
Press ◄/► to adjust the item to the desired
6
position.
46
display", then
Horizontal
Centres the image by moving it to the
picture
left or right.
position.
Vertical
Centres the image by moving it up or
picture
down.
position
Phase
Adjusts when characters have low
position
contrast or when the image fl ickers.
Auto
Automatically adjusts the image
Adjustment
NOTE
•
The "PC IN display" options in the "Picture" menu can be
adjusted only when inputting analogue signals through the
"PC IN" terminal.
•
Depending on resolution, the vertical/horizontal manual
range can be different.
PC compatibility chart
Resolution
VGA 640 g 480
800 g 600
SVGA
1.024 g 768
XGA
1.360 g 768
WXGA
1.280 g 1.024
SXGA
1.400 g 1.050
SXGA+
1.600 g 1.200
UXGA
1.920 g 1.080
1080p
VGA, SVGA, XGA, WXGA, SXGA, SXGA+ and UXGA are
registered trademarks of International Business Machines
Corporation.
NOTE
•
This TV has only limited PC compatibility, correct operation
can only be guaranteed if the video card conforms exactly to
the VESA 60 Hz standard. Any variations from this standard
may result in picture distortions.
Item
Horizontal Vertical
Frequency Frequency
31,5 kHz 60 Hz
37,9 kHz 60 Hz
48,4 kHz 60 Hz
47,7 kHz 60 Hz
64,0 kHz 60 Hz
65,3 kHz 60 Hz
75,0 kHz 60 Hz
67,5 kHz 60 Hz